White Wing WhiteWing II, Instruction Manual

08

07

TRIANgULAR/UPHOLSTERy BRUSH

The triangular brush is used where it is impossible or awkward to use the large brush.  
 

UPHOLSTERy, DRAPERy, BEDDINg, ETC. 

Cover the brush with a clean dry cloth. Use a rapid back and forth motion, making 
sure that you do not over saturate the material with steam. 

IMPORTANT: Prior to cleaning do a color check in an area that is not easily seen 
before you begin cleaning. WhiteWing

™

II is not responsible when these guidelines 

are not followed completely.

SQUEEgEE

The squeegee makes the cleaning and degreasing of windows easy. Attach the 
squeegee and steam clean while removing the dirt with the scraper.

CAUTION: During cold weather, warm up the windows with the window cleaner 
from a 2"–4" distance and with very little steam flow before starting the actual 
cleaning (to prevent possible damage to the window).

HIgH PRESSURE NOzzLE WITH SMALL ROUND 

BRUSH (NyLON & BRASS)

The high-pressure nozzle can be used with or without one of the small round 
brushes supplied with the steam cleaner. For items that are particularly prone to 
scratches, it is best to use the nozzle without a brush. For all other areas, start  
with the nylon brush (least abrasive) and carefully work your way up to the brass, 
then the stainless steel brush (optional). It is always better to use care when  
using the brushes to prevent damage or scratching.

The use of the steam nozzle alone is particularly good for cleaning and degreasing 
many working surfaces, ventilation hoods, see through oven doors, ventilation 
grating, kitchen furniture, stainless steel or enamel sinks, hand-basins, bath-tubs, 
water taps (to remove scale and water residue), doors, metal frames, car wheel 
rims, pet areas etc.

The nylon brush, because of its softness, is ideal for removing the dirt in grout, 
sinks and other surfaces where you need some light scrubbing action, but need  
to be careful not to scratch the surface. 

Tougher cleaning jobs may require the use of the brass brush that is supplied. 
Please make sure you are careful that it does not scratch the surface with this tool. 
Brass is tougher than nylon, but softer than stainless steel. For surfaces (grout for 
example) where the dirt is not being properly lifted with the nylon brush, carefully 
using the brass brush may give the best results.

For the toughest cleaning assignments (very caked on grease, rust, barbeque 
grills, very dirty grout), we recommend that you purchase the optional stainless 
steel brush that is available through your dealer. 

When using the steam nozzle with or without the brushes, you will need a cloth to 
wipe up the moisture and dirt that has been lifted through cleaning. 

FILLINg THE TANK

If the (low) water level control light (9) comes on during usage, and you would like 
to continue using the steam cleaner, you will need to follow the following steps:

1.  Turn the main switch (11) to the off position.  

2.  Hold the steam control on the handle (14) until all the steam has evacuated 

the steam cleaner.

3.  It is now safe to open the water tank cap (2). Refill the steam cleaner with 

cool water, refasten the water tank cap, turn main switch (11) on and wait for 
the steam control light to turn on.

MAINTENANCE OF THE BOILER 

To maintain your steam cleaner in good condition and to ensure constant perfor-
mance, we recommend that you periodically clean the boiler once or twice a year 
depending on the hardness of the water. 
 

CLEANINg INSTRUCTIONS

ATTENTION: Please make sure that the boiler is at room temperature, that it has not 
been used for at least 8 hours, and that the boiler is disconnected from the power 
source.

1.  Unscrew and remove the filling cap (2), turn the steam cleaner over and elimi-

nate all water remaining in the boiler. 

2.  Dissolve completely the contents of s single package of de-scaling powder in 

2 cups (0.5L) of water (sold seperately).

3.  Pour the solution into the boiler.

4.  Leave the solution in the boiler for one night with the filling cap off.

5.  Completely empty the contents of the boiler and rinse three or four times with 

water in order to eliminate possible residues of scale.

6.  It is a good idea to spray the first steam onto a cloth and not directly on any 

surface since there still may be scale in the system.

ATTENTION: IT IS NOT RECOMMENDED THAT yOU USE ANy OTHER CHEMICAL TO CLEAN 
THIS PRODUCT. DOINg SO WILL AUTOMATICALLy VOID THE WARRANTy.