WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A Phone (800) 782-
7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Instructions for Operation and Care of Dickson Paraffin Baths
9
the fingertips to the first knuckle and waiting about ten seconds
for the wax to cool. Next, dip the patient's hand from the
fingertips to the second knuckle (proceeding to cover up the first
layer of wax and effectively insulating the hand from some of the
heat). Continue to build the wax up incrementally by small
amounts.
OTHER USEFUL INFORMATION:
l
Model S is an old reference to current models PB-101 and
PB-107
l
Model K is an old reference to current model PB-104
l
Model BB
is an old reference to current model PB-105
l
Model H (no longer
being manufactured) is referring to an old PB-104 without a
drain.
l
The sanitize mode on the PB-104, PB-105, and PB-107 are
turned on with a timer.
l
The sanitize mode on a PB-101 is turned on with a three- way
switch.
l
All Dickson models have a sanitizing circuit.
l
Standard operating temperature is 126° to 130°F (52.2° to
54.4°C)
l
Lowest operating temperature is 126°F or 52.2°C.
Below this temperature, wax will harden (if lid is removed from
the unit or power is off)
l
A capillary thermostat is attached to the temperature control.
This device controls the temperature with a mechanism that
involves a tube filled with oil. The temperature heats up the
oil in the capillary, and the hotter it gets, the higher the oil
rises up the tube.
l
There are 2 overheating sensors in all models except for the
PB-101. The L-145 is the low limit overheating sensor. This
sensor will turn the unit off when it gets in the range of 145°
to 155°F (62.8 to 68.3°C). The other overheating sensor is for
the sanitize mode. This sensor will not allow the unit to go
past 200°F or 93.3°C.
l
Timer is only to be used to turn on the sanitize sequence in
which the temperature of the wax will approach 200°F or
93.3°C. All units except for the PB-101 are simply turned on
by plugging them in. The PB-101 has a switch.
PARTS LIST FOR DICKSON PARAFFIN BATHS
WHITEHALL PART #
DESCRIPTION
1
5902-111-399
Cover, Stainless Steel
x
x
x
x
2
6902-306-000
Cover, Plastic
x
x
3
6902-412-000
Cover, Plastic
(Front Section)
x
x
4
6902-410-000
Cover, Plastic
(Rear Section)
x
x
5
6902-308-000
Drain Insert
x
x
x
x
6
6902-350-000
Drain Valve
x
x
x
x
7
6902-130-001
Element, Heating 120V
x
x
8
6902-136-001
Element, Heating 220V
x
x
9
6902-327-000
Element, Heating 120V
x
10
6902-330-000
Element, Heating 220V
x
11
6902-438-000
Element, Heating 120V
x
12
6902-439-000
Element, Heating 220V
x
13
0710-230-001
Fuse Holder/Cap
x
x
x
x
x
x
x
x
Summary of Contents for Dickson PB-101
Page 4: ......
Page 26: ...Member of...
