6 Vision Assembly Guide
Press ON/OFF.
Optionally… Press ZOOM to select text size.
Squeeze & release Trigger on the handle grip.
Hold Trigger & hold ENTER, pump search coil (loop) up
and down on the ground until background hum steadies, release
ENTER… and then release Trigger and begin searching.
(Note releasing Trigger before releasing ENTER) locks Vision
in pinpoint mode, squeeze and release trigger twice to unlock
pinpoint.
Sweep search coil close to the ground, from side to side,
overlapping each pass.
Locate a consistent “BEEP” upon several passes of the
search coil.
Look at display. VDI, Blocks, and ICON, indicate a metal
target worthy of digging.
Pinpoint squeeze & hold toggle on the grip and slowly “X”
the area. Depth in inches and maximum bars indicates target
center.
Vision
™
- White’s Vision Metal Detectors -
Manufactured in
Sweet Home, Oregon USA
First Time Out - ”Turn On And Go” ...
P/N 621-0514
Printed in USA
3/09
