background image

 

P.O. Box 2827 
Eugene, OR 97402 USA

 

Production Code: 
 
 
 
 
 

VN 

04/13 

 

Model # 

1141AFGSPc; 
1141AFCAFc

 

Pacific Blanket 
Dresser 

AFGSP = Glazed Spice finish 
AFCAF = Caffè finish

 

Assembly Instructions 

 

Congratulations! 

This fine piece of furniture will make a gorgeous addition to 
your home. For the best results, read the Assembly 
Instructions before you begin your project.

IMPORTANT NOTES: 

  For normal household use only. 

Not

 recommended for 

commercial use. 

  Do not climb, sit or stand on this piece of furniture. 
  Do not overload the drawers. 
  Unload items before you move this unit. 
  Before you load or move this unit, tighten all screws and 

supports. 

  Before you begin your project, completely read the 

Assembly Instructions. 

  Store this item: 1- in its box; 2- in a dry place; 3- in 

temperatures that range from 40°F to 90°F (not on a cold 
and possibly damp cement floor). 

  Periodically inspect your furniture for any loose glue 

joints, screws or any other problem that might affect the 
stability of your furniture. Tighten or repair as needed. 
 

 

WARNING

 

Serious or fatal crushing injuries can occur from 

furniture tip-over. To help prevent tip-over: 

  Place heaviest items in the bottom drawers. 
  Unless specifically designed to accommodate, do not 

set TVs or other heavy objects on top of this product. 

  Never allow children to climb or hang on drawers, doors 

or shelves. 

  Never open more than one drawer at a time. 

Use of tip-over restraints may only reduce but not 

eliminate the risk of tip-over.

 

 
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 

 CALL US FIRST! 

Do not return this item to the store

 

Service Policy:

 We will replace any part that is defective, 

missing or damaged during assembly. For a replacement 
part, directly contact Whittier Wood Products customer 
service department by phone, fax, mail or email. 
 

Hours:

 Our friendly customer service staff can be reached 

Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You 
may leave a message 24 hours a day, seven days a week.

 

To Order:

 Provide the finish and furniture model number 

(upper portion of this page), the part letter, production 
code, quantity needed, reason for replacement and your 
full name, address and telephone number. 
 

Parts ship from our Eugene, Oregon factory within one or 
two business days from the time we receive your request. 
Please allow five to ten business days for delivery.

 

800-653-3336

 

 

Outside the U.S. or Canada: 541-687-

0213 • Fax: 541-687-2060 

www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

 

 
 

Summary of Contents for 1141AFGSPc






Reviews: