1131GACh 1131CAFh 1131FSTh McKenzie 8-Drawer Dresser
Assembly Instructions
1131GACh_1131CAFh_1131FSTh — Page 4 — 06/20
Tools Required: Phillips Screwdriver, Pencil.
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide
1. This piece of furniture includes two drawer interlock systems, one controlling each vertical bank
of drawers; this allows only one lower drawer in each bank to be open at a time. This safety
feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.
2. Place the unit at its final destination. Use the Leveler Adjustment Key (ZF), found in the Zip bag
taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (ZE) on the
bottoms of the legs and rotate the Adjustable Glide with Hex Nut (X) at the bottom of the
Assembled Foot (Y) until the unit is level until the unit is level. See Figures 2 and 2a.
3. If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note
where each drawer came from to make sure you place them back into their correct positions.
Fig. 3
Drawer Release Lever
Fig. 3a
Fig. 2
X
Y
ZE
Loose
Tight
Fig. 2a
ZF
ZE
ZE
