Whittier Wood Furniture McKenzie 2346CAFd Assembly Instructions Manual Download

Page: 5 / 9

2346GACd 2346CAFd McKenzie Queen Mantel Bed

2349GACd 2349CAFd McKenzie King Mantel Bed

Assembly Instructions

This assembly requires two people.

2346GACd_2346CAFd_2349GACd_2349CAFd_Page 5 — 12/19

Tools Required

Phillips screwdriver

1. Remove the Slats (D) from the back of the Headboard (Ac) and place them off to the side. See

Figures 1 and 1a.

Notes:

Step 2 & 3 are for the McKenzie King Mantel Bed (#2349) only

NOTE: READ CAM INSTRUCTIONS NOW BEFORE YOU BEGIN THE FOLLOWING STEP.

Insert Cam Housings (YK) into the two pre-drilled holes on the Headboard Assembly (Ac) as

shown in Figure 2. Lower Top Assembly (YH) so that the Cam Connectors (YJ) fit into the

housings (YK) tighten the cam housings as indicated in the Cam-lock System instructions.

See Figures 2 and 2a.

Fig. 2

x 2

Fig. 2a

Fig. 1

Shipping Straps

Fig. 1a

Shipping Straps

(For 2346)

(For 2349)

Summary of Contents for McKenzie 2346CAFd










Search results

Summary of Contents for McKenzie 2346CAFd

Reviews:

Related manuals for McKenzie 2346CAFd

Brands by name

Popular brands

Whittier Wood Furniture McKenzie 2346CAFd, Assembly Instructions Manual

Search results

Summary of Contents for McKenzie 2346CAFd

Reviews:

Related manuals for McKenzie 2346CAFd

Brands by name

Popular brands