1230LSOd; 1230DAOd 6-Drawer Prairie City Chest
Assembly Instructions
1230LSOd_1230DAOd — Page 5 — 11/16
5.
Example; if you want to remove the First Drawer and Second Drawer from the Chest; remove
the Second Drawer first. When you remove this drawer, the upper arm on the Anti-Tip Snapper
for that side will be pulled forward. See Fig. 5d. As long as this arm is angled toward the front of
the case, you cannot remove the First Drawer. Move the upper arms of the Anti-tip Snapper to
the unlocked position as shown in Figure 5e. You can then remove the First Drawer as shown in
Step 3. To reinstall the drawers, install the First Drawer then move the upper arm of the Anti-tip
Snapper to the forward locked position. Now you can reinstall the Second Drawer.
Fig. 5
Drawer Clip
Drawer Clip
Snapper
Close up view of
locked second
drawer.
Fig. 5a
Fig. 5b
Fig. 5d
Close up view of
locked first
drawer.
Fig. 5c
Fig. 5e
Unlocked position
