1300GACf 1300CAFf McKenzie Twin Storage Bed
& 1359GACf 1359CAFf McKenzie Twin Bookcase Storage Bed
Assembly Instructions
This assembly requires two people.
1300GACf_1300CAFf_1359GACf_1359CAFf — Page 7 — 08/17
Tools Required: Phillips screwdriver, Slotted Screwdriver, 7/16" open end or box end wrench.
1.
Remove the Assembled Feet (YM) from the back of the Footboard (YB) as seen in Figure 1 and
place them off to the side.
2.
The orientation of the drawer opening will be based on facing the backside of the footboard.
Decide if you want the drawers to open on the left side or the right side of the bed. Figure 2
below shows the drawers opening on the right side. If you want the drawers to open on the left
side, move the Footboard (YB) to the opposite end of the Pedestal Kit (YC). To attach the
Footboard (YB) to the Pedestal Kit (YC), align the brackets and slide the Pedestal Kit down on
to the Footboard (YB). See Figures 2 and 2a.
Fig. 2
Fig. 2a
YC
YB
YB
Fig. 1
YM
