1613AUFb; 1619AUFb; 1625AUFb & 1631AUFb McKenzie Alder Cabinet
Assembly Instructions
1613AUF_1619AUF_1625AUF_1631AUF — Page 3 — 09/20
Tools Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer.
Tools Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and
Safety Guide.
1. Place bookcase at its final destination. Use the Leveler Adjustment Key (Ua), found in the Zip
bag taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (U) on the
bottom of the legs until the unit is level. See Figure 1 and 1a.
2.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (D). Remove the #6 x 1/2" Undercut
Screws (E) from the underside of the shelf and take out the Shelf and Shelf Brackets (R). Insert
the Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may
secure them by inserting #6 x 1/2" Undercut Screws (E). See Figures 2 and 2a.
Continued on page 4
U
Loose
Tight
Ua
U
U
Fig. 1a
Fig. 1
Fig. 2
E
R
Fig. 2a
Door removed for illustration purposes.
D
D
