background image

P.O. Box 2827
Eugene, OR 97402 USA

Service Policy:

 

We will replace any 

parts which  are defective, missing or 
damaged during assembly. Please contact 
Whittier Wood Products customer service 
department directly (by phone, fax, mail or 
email) for replacement parts.

Hours:

 

Our friendly customer service staff 

can be reached Monday-Friday 7:00 a.m. to 
5:00 p.m. (Pacific Time). A message can be 
left 24 hours a day, 7 days a week. 

To Order:

 

Provide the complete furniture 

model number, part letter, production code, 
quantity needed, reason for replacement 
and your full name and address along with 
a telephone number in case we need to 
contact you.

Parts ship from our Eugene, Oregon factory 
within 1 or 2 business days from the time 
we receive the request. Please allow 5-10 

business days for delivery.

 

Outside U.S. or Canada: 541-687-0213

Outside U.S. or Canada: 541-687-0213

Fax: 541-687-2060 • Email: info@whittierwood.com

Fax: 541-687-2060 • Email: info@whittierwood.com

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

193W

Portland 
Pedestal Base

 4/05

Production Code:

  Read both the Assembly Instructions and Finishing 

Hints completely before beginning. 

  Store the parts: 1) in their box; 2) in a dry place; 3) in 

temperatures ranging from 40° to 90°. (Not on a cold, 
possibly damp, cement floor.) 

  Inspect your furniture periodically for any loose glue 

joints or screws, or any other problem which may 
be affecting the stability of your furniture. Tighten or 
repair as needed.

For normal household use only. 

 recommended for commercial use.

Congratulations!

This fine piece of furniture will make a handsome 
addition to your home. For the best results, start by 
reading both the Assembly Instructions and 
Finishing Hints before you begin your project.

Do not climb, sit or stand on this piece of 
furniture.

Assembly Instructions

TOP SOLD 

SEPARATELY

403W

Large 
Traditional 
Table Base

Summary of Contents for 193W

Page 1: ...da 541 687 0213 Fax 541 687 2060 Email info whittierwood com Fax 541 687 2060 Email info whittierwood com Mail P O Box 2827 Eugene Oregon 97402 U S A Mail P O Box 2827 Eugene Oregon 97402 U S A 193W Portland Pedestal Base 4 05 Production Code Read both the Assembly Instructions and Finishing Hints completely before beginning Store the parts 1 in their box 2 in a dry place 3 in temperatures ranging...

Page 2: ...on the parts list below I 3 8 Nut Qty 4 HARDWARE J 1 2 x 2 Dowel Qty 4 G 3 8 x 4 Hanger Bolt Qty 4 K T Nut Qty 4 L Adjustable Glide Qty 4 D 12 x 2 Pan Head Screw Qty 8 E 5 16 x 3 Lag Bolt Qty 4 F Flat Washer Qty 4 H Curved Washer Qty 4 A 193W Foot Qty 4 A 403W Foot Qty 4 B 403W Pedestal Qty 1 B 193W Pedestal Qty 1 C Top Support Qty 1 ...

Page 3: ...reads meet or use the double nut method as shown below DOUBLE NUT METHOD With the Double Nut method you lock two nuts together turning them in opposite directions and then use a 9 16 or adjustable wrench on the outside nut to screw the bolts in TO ATTACH TOP SUPPORT TO PEDESTAL 1 Spread a thin film of glue on top of the Pedestal B before attaching the Top Support C To screw the Top Support to the ...

Page 4: ...riable speed drill with a Phillips bit Drill the holes 3 4 deep To prevent accidentally drilling through the table top mark the drill bit with a piece of tape 3 4 from the end 9 Put the table base back into position and tighten all screws solidly into the table top Rubbing a little soap on the threads will help the screws go in more easily 10 When in the final location rotate the adjustable glides...

Reviews: