6.
Page 5 — 2002AEGACa_AEGSPa_AECAFa — 06/14
Side adjustment
Depth adjustment
To move the door towards the side panel/vertical divider, rotate screw ‘2’ counter-clockwise.
To move it away, rotate screw ‘2’ clockwise.
Loosen screw ‘1’ and adjust door. Re-tighten screw.
Height adjustment
Loosen screws ‘3’ and adjust door. Re-tighten screws.
Fig. 6
1
2
3
3
The door may need to be adjusted so that all the spaces between the doors and unit sides are
equal. To make those adjustments, follow the instructions below. See Figure 6.
Fig. 5
Fig. 5a
Center Shelf
Fig. 5b
Side Panel
5.
Attach the door with the Side Panel Hinges (D) to the side panels of the bookcase (see Fig. 5b)
by inserting the screws in the Hinge Plate (E) into the second and third holes up from the bottom of
the bookcase unit. See Figure 5. Attach the second Side Panel Hinge assembly to the same
door/bookcase by inserting screws ino the third and fourth predrilled holes down from the top of the
fixed centered shelf. See Figure 5a. Repeat the steps for other side.
Attach doors with Vertical Divider Hinges (G) and Washers (H) to each side of the vertical divider of
the bookcase in the same manner.
Bottom
Vertical
Divider
Fixed
Center
Shelf
