2075AFGACc; 2075AFCAFc 54"W Corner Media Console
Assembly Instructions
2075AFGACc_2075AFCAFc
— Page 4 — 04/14
Tool Required: Phillips Screwdriver, Pencil.
1.
Move the unit to its final destination. To level the unit, turn the Small Adjustable Glides (ZJ)
found at the bottom left and right front corners.
To place your media components and access wires into the console more easily, you may want
to detach the Removable Backs (D). To do so, unlock the Turn Buttons (ZC) as shown in
Figures 1 and 1a. Slide the Backs away and place them off to the side. To put them back into
place, slide the Backs behind the Drawer Stops (ZB) and position the Turn Button so that it is
locked. See Figure 1b.
2.
To move the Adjustable Shelf (B), remove the #6 x 1/2" Undercut Screws (M) and the Shelf (B).
Reposition the Shelf Brackets (L) to the desired positions, replace the shelf and insert the
screws. See Figures 2 and 2a.
Continued on Page 5
Fig. 2
M
L
Fig. 2a
Doors removed for illustration purposes.
B
Fig. 1
Fig. 1b
Fig. 1a
Unlocked
ZC
ZC
D
D
ZB
D
Locked
ZB
