2.
Install
Rotate the Adjustable Glides found at the bottoms of the Assembled Foot (R) until the unit is level.
Doors removed for purposes of
this illustration.
the Adjustable Shelves (B) at the desired location using the Shelf Brackets (J). See Figure 2.
Attach the shelves to the shelf brackets by inserting
#6 x 1/2" Undercut Screws (K) through the
bottom of the shelf bracket and into the shelf. See Figure 2a.
3.
Position unit at desired location. Locate stud in the wall behind unit. Attach Clip (N) to wall stud with
#8 x 2" Black Screws (P). See Figure 3a. Attach second clip to unit with #8 x 1" Pan Head
Screws (Q). See Figure 3b. Connect the two clips with Nylon Restraint Strap (O). See Figures 3c
and 3d. If studs cannot be located, purchase proper attachment hardware for your type of wall and
secure unit according to that hardware’s instructions.
Tipping Restraint
Fig. 3a
Fig. 3c
Fig. 3d
Fig. 3b
Fig. 2
N
P
P
Q
Q
N
N
O
Fig. 2a
K
J
B
B
2657AFGAC McKenzie Buffet
Assembly Instructions
TOOL REQUIRED:
Phillips Screwdrivier
2657AFGAC — Page 3 — 08/08
