3499AFGAC; 3499AFCAF McKenzie Cocktail Table
Assembly Instructions
3499AFGAC_3499AFCAF
— Page 3 — 08/13
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1.
Turn the Top Assembly (A) upside-down on a clean, protected surface. Place two Legs (B) at
the back of the Top Assembly (A), making sure the drilled corners of the legs face toward the
Corner Blocks. Attach with 5/16" Flat Washers (E) and 3/8" x 2-1/2" Hex Bolts (F). See Figures
1 and 1a.
2.
Rotate the Top and Leg assembly so that is sets on the back legs. Turn the Shelf Assembly (C)
bottom-side-down and place the dowels into the dowel holes in the Legs. See Figure 2.
Fig. 1
B
B
Fig. 1a
A
E
F
x 2
x 2
E
F
Fig. 2
C
