Production Code:
10/13
VN
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, contact Whittier Wood
Products customer service department by
phone, fax, mail or email.
To Order:
Provide the finish, the furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST!
Do not return this item to the store.
800-653-3336
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours:
Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message
24 hours a day, seven days a week.
.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only.
Not
recommended
to use in a commercial setting.
Do not climb, sit or stand on this piece of furniture.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a
cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
362KFGACb; 362KFCAFb
Centennial Table
Model #
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
•
•
•
•
•
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer.
Warning
: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
