background image

 

P.O. Box 2827 
Eugene, OR 97402 USA

 

Production Code: 
 
 
 
 
 

VN 

03/14 

 

Model # 

5197AFGMS

 

Ambierle 
Chairside Table 

Glazed Millstone finish 

Assembly Instructions 

 

 

 
Congratulations! 

This fine piece of furniture will make a gorgeous 
addition to your home. For the best results, read the 
Assembly Instructions before you begin your project. 

IMPORTANT NOTES: 

  For normal household use only. 

Not

 recommended for commercial use. 

  Do not climb, sit or stand on this piece of furniture. 
  Do not overload the drawer. 
  Unload items before you move this unit. 
  Before you load or move this unit, tighten all screws and supports. 
  Before you begin your project, completely read the Assembly 

Instructions. 

  Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that 

range from 40°F to 90°F (not on a cold and possibly damp cement 
floor). 

  Periodically inspect your furniture for any loose glue joints, screws or 

any other problem that might affect the stability of your furniture. 
Tighten or repair as needed. 

 

 

WARNING

 

Notice to California Customers 

California Prop 65 requires consumer goods to be labeled if any one of 
850+ different chemicals or substances, including wood dust, is present 
even in trace amounts. Drilling, sawing, sanding or machining wood 
products generates wood dust, a substance known to the State of 
California to cause cancer. 

Warning

: This product contains a chemical 

or substance known to the State of California to cause cancer, birth 
defects or other reproductive harm. 

California Health and Safety Code 

Section 25249.6

 

 
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 

 CALL US FIRST! 

Do not return this item to the store

 

Service Policy:

 We will replace any part that is defective, 

missing or damaged during assembly. For a replacement 
part, directly contact Whittier Wood Products customer 
service department by phone, fax, mail or email. 
 

Hours:

 Our friendly customer service staff can be reached 

Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You 
may leave a message 24 hours a day, seven days a week.

 

To Order:

 Provide the finish and furniture model number 

(upper portion of this page), the part letter, production 
code, quantity needed, reason for replacement and your 
full name, address and telephone number. 
 

Parts ship from our Eugene, Oregon factory within one or 
two business days from the time we receive your request. 
Please allow five to ten business days for delivery.

 

800-653-3336

 

 

Outside the U.S. or Canada: 541-687-

0213 • Fax: 541-687-2060 

www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

 

 

Summary of Contents for 5197AFGMS

Page 1: ... dust is present even in trace amounts Drilling sawing sanding or machining wood products generates wood dust a substance known to the State of California to cause cancer Warning This product contains a chemical or substance known to the State of California to cause cancer birth defects or other reproductive harm California Health and Safety Code Section 25249 6 DESIGN SUBJECT TO CHANGE WITHOUT NO...

Page 2: ... C Drawer Box inserted 1 D Drawer Face installed 1 E Drawer Slide pre installed set 1 F 6 x 3 4 Philtruss Screw inserted 6 G 6 x 1 2 Philtruss Screw inserted 6 H 8 x 1 3 8 Lo Profile Screw inserted 8 I 8 x 1 1 4 Pan Head Screw inserted 42 J 8 x 7 8 Black Lo Profile Screw inserted 4 K 3 8 x 1 Insert Nut inserted 8 L 1 4 x 20mm Insert Nut inserted 4 M Adjustable Glide installed 4 N Knob attached 1 O...

Page 3: ...n the right Drawer Release Lever See Figure 1a 2 Turn the unit upside down on a clean protected surface Place two Legs B at the front corners of the Case Assembly A making sure the drilled corners of the legs face toward the Corner Blocks Insert two 3 8 x 2 1 2 Hex Bolts Q with two Flat Washers P through the Corner Blocks and into the leg and fasten securely See Figures 2 and 2a Repeat for the oth...

Page 4: ...ly Instructions 5197AFGMS Page 4 03 14 3 Turn the table upright and insert the Drawer C 4 Place the table at its final destination To level the table rotate the Adjustable Glide M found at the bottom of each leg assembly See Figure 3 Fig 3 M M ...

Reviews: