background image

 FOR NORMAL HOUSEHOLD

USE ONLY.

NOT

 RECOMMENDED FOR

COMMERCIAL USE.

CONGRATULATIONS ON YOUR CHOICE OF A WHITTIER WOOD PRODUCT. THIS FINE, HARDWOOD FURNITURE WILL BE A

HANDSOME ADDITION TO YOUR HOME.  JUST FOLLOW THE STEP BY STEP INSTRUCTIONS.

SERVICE POLICY:

 WE WILL REPLACE ANY PARTS WHICH ARE DEFECTIVE, MISSING OR DAMAGED

DURING ASSEMBLY. PLEASE CONTACT WHITTIER WOOD PRODUCTS CUSTOMER SERVICE DEPARTMENT

DIRECTLY FOR REPLACEMENT PARTS. IF YOU LIVE IN THE U.S. OR CANADA, YOU CAN REACH US TOLL

FREE AT: 800-653-3336. ALL OTHER CUSTOMERS CAN REACH US BY CALLING 541-687-0213, FAXING

541-687-2060 OR WRITING TO P.O. BOX 2827, EUGENE, OR-USA 97402.
CUSTOMER SERVICE PERSONNEL CAN BE REACHED MONDAY-FRIDAY, 7:00 A.M. TO 5:00 P.M. PACIFIC

TIME. A MESSAGE CAN BE LEFT FOR CUSTOMER SERVICE 24 HOURS A DAY, SEVEN DAYS A WEEK.
WHEN CONTACTING US, PLEASE PROVIDE THE FURNITURE MODEL NUMBER, PART LETTER, QUANTITY

NEEDED, REASON FOR REPLACEMENT AND YOUR FULL NAME AND ADDRESS ALONG WITH A TELEPHONE

NUMBER IN CASE WE NEED TO CONTACT YOU.

IMPORTANT NOTES

O

READ INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY.

O

ADDITIONAL SANDING WITH 220 GRIT IS RECOMMENDED FOR ENHANCED BEAUTY.

O

ALWAYS SAND WITH THE GRAIN OF THE WOOD. BE CAREFUL NOT TO SAND THROUGH THE

VENEER.

O

BEFORE FINISHING, READ ENCLOSED FINISHING HINTS.

O

TO SEAL THE WOOD, APPLY A MINIMUM OF ONE COAT OF POLYURETHANE, VARNISH,

LACQUER OR THE EQUIVALENT TO ALL SIDES. THIS WILL PREVENT MOISTURE CHANGES

WHICH COULD CAUSE FUTURE WARPAGE OR CUPPING.

O

STORE THE PANELS: 1) IN THEIR BOX, 2) IN A DRY PLACE, 3) IN TEMPERATURES RANGING FROM

40° TO 90°. (NOT ON A COLD, POSSIBLY DAMP, CEMENT FLOOR.)

INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER PROBLEM WHICH MAY BE

AFFECTING THE STABILITY OF YOUR FURNITURE. TIGHTEN OR REPAIR AS NEEDED.

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 Rev. 8/03

INSTRUCTION SHEET FOR READY-TO-ASSEMBLE

732W

Cambridge

Corner

Entertainment

Center

DO NOT CLIMB, SIT, OR

STAND ON THIS PIECE OF

FURNITURE.
DO NOT OVERLOAD

SHELVES ON THIS PIECE

OF FURNITURE.
UNLOAD ITEMS FROM THIS

UNIT PRIOR TO  MOVING.
BEFORE LOADING OR

MOVING THIS PIECE OF

FURNITURE, CHECK ALL

SCREWS AND SUPPORTS

FOR TIGHTNESS.

Summary of Contents for 732W
















Reviews: