1614aAUF; 1620aAUF; 1626aAUF & 1632aAUF McKenzie Alder Hutch
Assembly Instructions
1614AUFa_1620AUFa_1626AUFa_1632AUFa — Page 3 — 08/19
Tools Required: Phillips Screwdriver, Pencil, Rubber mallet or Padded hammer.
1.
To install the adjustable shelves:
Determine where you want to place the Adjustable Shelves (C). Insert the Shelf Brackets (Q) flat
side down into the four different holes and install the shelf. Insert the #6 x 1/2" Undercut Screws
(G) from the underside of the shelf. See Figures 1 and 1a.
2.
NOTE: READ THE RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW (See Page 9)
BEFORE YOU BEGIN THE FOLLOWING STEP
.
To move the Lower Shelf (D) or Lower Shelves (E and F), loosen the Rafix Cams (P) and
remove the Shelf/Shelves. Reposition the Rafix Bolts (O), replace the shelf and settle the Rafix
Cams over the Bolts. Tighten the Rafix Cams. See Figures 2, 2a and 2b.
Fig. 1
G
Q
Fig. 1a
C
C
C
C
Fig. 2
P
O
Fig. 2b
E
F
D
Fig. 2a
(1632)
(1614)
