11
Reversing the Door Position
1. Start by removing the bottom hinge from the bot-
tom of the freezer. Unscrew the two screws from
the bottom hinge. Remove the leg from opposite
side. Slide the door down, away from the hinge
pin located on the top of the door.
2. Remove the top hinge cover from door first. Then
unscrew the two screws from top door hinge and
replace on the other side.
3. To install the top hinge on the left side of the ap-
pliance, secure the two screws through the hinge
and into the top of the appliance. Slide the door
back on to the top hinge. Ensure the door is face
up. Replace the top hinge cover on the top hinge
by pressing down until it clicks into position.
4. Screw the bottom hinge into place on the new
side. Replace the leg on the other side.
5. Ensure the door is aligned horizontally and verti-
cally and that the seal is closed on all sides be-
fore finally tightening the bottom hinge. Re-adjust
the leveling leg.
Caution: To avoid injury to yourself and/or property, we recommend someone assist you during the door
reversal process.
1
2
3
4
5
