background image

PARTS AND CONTROLS 

1. Pump Button 

Press to activate the pump operation. The Pump indicator light will illuminate when water pump is in operation. 

Note: Make sure the pump drain hose is installed into the unit and the continuous/gravity drain assembly is re-
moved from the unit before the pump operation is activated. The water pump function will start when the drain 
bucket is full.  

 

2. Comfort Button 

Press to activate the Comfort Dehumidifying mode operation. The Comfort Dehumidifying indicator light will come 
on when this mode is selected. In this mode, the unit will automatically control the room humidity in a comfortable 
range of 45%~55% according to the room temperature. The humidity setting function is automatically disabled. To 
stop Comfort Dehumidifying operation, press the Comfort button and set the desired RH percentage value to re-
sume normal operation. 

 

3. Filter Button 

The check filter indicator is a reminder to clean the air filter for more efficient operation. The filter light will illuminate 
after approximately 250 hours of operation. To reset after cleaning the filter, press the Filter button and the light will 
turn off. 

 

4. Continuous Button 

Press to activate the Continuous dehumidifying operation. The Continuous indicator light will come on when this 
mode is selected. To stop continuous operation, press the Continuous (CONT.) Button and set the desired RH per-
centage value to resume normal operation. 

Note: The Humidity Set Control Buttons will be disabled. The compressor will not stop unless the drain bucket is 
full, or is removed. 

 

5

Turbo Button  

Press the Turbo button to engage Turbo Fan mode. The Turbo indicator light will come on when this speed is se-
lected. Press the Turbo button again to set the unit to Normal Fan mode. The Turbo indicator light will turn off when 
Normal Fan mode is activated. 

Comfort 
Button 

Filter 
Button 

Continuous 
Button 

Turbo 
Button 

Timer 
Button 

Power 
Button 

Humidity / 

 

Timer Control 
Button 

Comfort Dehumidifying 
Operation indicator light 

Clean Filter 
indicator light 

Auto Defrost on 
indicator light 

Continuous 
Operation  
Indicator light 

Turbo Fan 
Indicator light 

Bucket Full 
Indicator light 

Timer On and Off 
Indicator light 

RH% and Timer 
Display 

Pump 
Button 

Summary of Contents for RPD-311DW



















Reviews: