background image

PARTS AND CONTROLS 

 

Energy Saver 

When the unit is running on normal operation, once the RH% is reached, the fan will still run continuously to avoid 

high start-up amperage which makes the unit energy-efficient . Please note that the fan may run continuously or 

shut off intermittently depending on the RH% and set humidity. 

 

7. Timer Button 

Press to activate the Timer delay feature, in conjunction with the Down and Up Buttons.  

 

Timer Delay Switch Off 

When the appliance is ON, press the Timer button to activate Auto-stop function and the Timer OFF 

light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons. The 

time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switch-

es off. To cancel the delayed switch off function, set the time to “00” or turn off the appliance.

 

 

Timer Delay Switch On 

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer ON light 

will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. The time 

increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance turns on. To 

cancel the delayed switch on function, set the time to “00” or turn off the appliance. 

 

Timer Delay Switch On and Off Sequence 

When the appliance is OFF, press the Timer button to activate Auto-start function and Timer light ON 

will come on. Set the desired time delay ON hours by pressing the UP and DOWN buttons. Once Timer 

Delay Switch On is placed, press the Timer button again to activate Auto-stop function and the Timer 

OFF light will come on. Set the desired time delay OFF hours by pressing the UP and DOWN buttons. 

When the delay time set has elapsed, the appliance switches off. To cancel the delayed switch off func-

tion, set the time to “00” or turn off the appliance. 

 

Bucket Full Indicator 

The appliance will run continuously until the set RH% is reached or when the drain bucket is full. When the drain 

bucket is full, the Full indicator light will illuminate and the dehumidifier will stop operating. Remove the water in the 

bucket with two hands, then place the drain bucket back to it's proper position and the machine will start operating 

again.   

NOTE: The Full Indicator light will be off even if the water is full in Water Pump Drain Method. See page 13. 

 

Auto Defrost Indicator 

In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run 

until the frost is evaporated. This happens when the appliance is operating in low temperatures (less than 53°F or 

12°C), which affects the efficiency of the dehumidifier. When this happens, the Auto Defrost light will turn on and 

the machine will go into periodic defrost mode automatically. Defrost time may vary. If the dehumidifier freezes up, 

turn the appliance off for few hours and then restart.  The appliance will not operate satisfactorily if the room tem-

perature is below 41°F 

 

 

Summary of Contents for RPD-501WP




















Reviews: