background image

Safety Precautions 

APPLIANCE SAFETY  

Your safety and the safety of others are very important to us.  

 

 

 

This is the Safety Alert Symbol. This symbol alerts you to potential hazards 
that may result in serious injury. All safety messages will follow the Safety  
Alert Symbol and either the words” DANGER” or “WARNING”.  

 

Danger means that failure to heed this safety 
statement may result in severe injury or death.  

 
Warning means that failure to heed this safety 
statement may result in extensive product dam-
age, serious injury, or death.  

 
Caution means that failure to heed this safety 
statement may result in minor or moderate injury, 
or property or equipment damage.  

 

All safety messages will alert you to know what the potential hazard is, tell you how to reduce the 
chance of injury, and let you know what can happen if the instructions are not followed.  

 

IMPORTANT SAFEGUIDES

 

Before the appliance is used, it must be properly positioned and installed as 
described in this manual, please read the manual carefully. To reduce the 
risk of fire, electrical shock or injury when using the appliance, follow basic 
precaution, including the following:  

 

 

 

 

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do 
not use an extension cord. 

 

Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electri-
cian. 

 

It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles 
that cannot be turned off by a switch or pull chain. 

 

Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can create a fire 
hazard or explosion. 

 

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or 
any other appliance. 

 

Before proceeding with cleaning and maintenance operations, make sure to unplug the appliance.  

 

Do not connect or disconnect the electric plug with wet hands. 

 

Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in 
this manual. All other servicing should be referred to a qualified technician. 

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow 
these basic precautions 

Summary of Contents for WC-181DA














Reviews: