1. Remove all packaging.
2. Set up the wine cooler on a level surface. Make sure you have at least
4
” clearance on each side and 6” clearance in the back for ventilation.
3. Clean the interior surface with warm water and a soft cloth.
4. Insert power cord into a power socket. Maker sure the power socket is
grounded 115v ~AC / 60 Hz socket.
5. Fill the wine cooler with your choice of wine bottles. Allow up to 24
hours of operation for the bottles to reach the desired temperature.
3. Operation Guide
Temperature Control
Use the temperature adjustment buttons on the control panel to change the
set temperature. Press the
“▼” button to lower the temperature or “▲” button
to raise the temperature.
NOTE: To switch the display between Celsius and Fahrenheit press both
“▲”
and “▼”buttons simultaneously and hold for 3 seconds.
The temperature inside the wine cooler is dependant on the ambient
temperature (room temperature) outside the wine cooler. The wine cooler
temperature can range between 52 -65 degrees F.
In red wine setting, the temperature range should be between 57 - 61 F and in
white wine setting, the temperature range should be 54- 57 F.
This is based
on an ambient room temperature of 77F
.
Interior Light
Your wine cooler has an interior light with on/off button. Turn the light on or off
by pressing the button
Door Lock
Your wine cooler has a factory installed lock with keys. To lock the wine
cooler, insert the key into the lock and turn it counter clockwise until the metal
tab is fully extended. To unlock the wine cooler, insert the key into the lock
and turn it clockwise until the metal tab is fully retracted.
Caution:
Make sure to keep the key in a safe place and out of reach of
children.
Levelling Legs
Your wine cooler comes with four levelling legs. To adjust these legs, carefully
lean the wine cooler to one side (make sure it is emptied and the door is
secured) and unscrew the legs to make them longer. Screw the legs tighter to
make them shorter.
