2010 Edition 1
Page 6
WHYTE Service Manual
Frame Size
Small
Medium
Large
Head Angle
70.0°
70.0°
70.0°
Seat Angle
73.5°
73.5°
73.5°
Top Tube
576.2mm
600.9mm
614.0mm
BB Height*
311.5mm
311.5mm
311.5mm
Stand Over
775mm
794mm
818mm
Wheel Base
1077.5mm
1093.0mm
1107.9mm
Chain Stay
420mm
420mm
420mm
Seat Post
30.9mm
30.9mm
30.9mm
X
A
B
C
D
E
F
G
H
2.2.2: WHYTE 19 C, CS, RACE & WORKS
Frame Size
Small
Medium
Large
Head Angle
68.5°
68.5°
68.5°
Seat Angle
73.5°
73.5°
73.0°
Top Tube
583.8mm
598.5m
617.8mm
BB Height*
313.5mm
313.5mm
313.5mm
Stand Over
773mm
797mm
824mm
Wheel Base
1091.9mm 1107.4mm 1122.2mm
Chain Stay
425mm
425mm
425mm
Seat Post
30.9mm
30.9mm
30.9mm
X
A
B
C
D
E
F
G
H
Extra
Large
68.5°
73.0°
628.8mm
313.5mm
844mm
1133.9mm
425mm
30.9mm
Extra
Small
68.5°
74.0°
561.5mm
313.5mm
768mm
1073.9mm
425mm
30.9mm
2.2.3: WHYTE 801, 805 & 809
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø673mm tyres fitted (2.1” / 52-559)
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25” / 54-559)
2010 Edition 1
Page 15
WHYTE Service Manual
5.2: WHYTE 19 TRAIL ADJUSTABLE DROPOUT SYSTEM
5.3: GENERAL WHYTE HARDTAIL MTB LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte hardtail bicycle,
please refer to the specific component manufacturers detailed instructions bundled with
this manual or for further information visit the specific manufacturers website.
Point
Description
Lubricant
Lubrication Interval
1
LH & RH Dropout Plate Pivot Area (Face Only)
SKF Anti Fret Paste
Check Once a Month
2
RH SS Plate Pivot Area (Face Only)
SKF Anti Fret Paste
Check Once a Month
3
LH & RH Dropout Plate Clamp Area (Face Only)
SKF Anti Fret Paste
Check Once a Month
4
RH SS Plate Clamp Area (Face Only)
SKF Anti Fret Paste
Check Once a Month
Fig.6: Whyte 19 Trail Dropout lubrication
