1
(e)
IF YOU NEVER READ MANUALS, READ THIS!
The eyeSCREAM™ Stereoscopic Eyewear System is designed to give you a very high quality, comfortable visual
experience. You should not experience any discomfort whatsoever when using this product with the appropriate games. If
you don't read anything else in this manual, please read the section on "Adjustments for the Maximum Visual Experience," to
ensure that your experience is everything you're hoping for!
INTRODUCTION
Congratulations on your purchase of the eyeSCREAM™ Stereoscopic Eyewear System. You have joined a growing
community of PC enthusiasts, who have demanded and found the ultimate PC gaming experience. The Wicked3D
eyeSCREAM Stereoscopic Eyewear System will allow you experience truly immersive gaming with near universal 3D
stereoscopic support. In addition, you will reap the benefits of Metabyte’s awesome driver technology for use with your
eyeSCREAM-Ready product. Features such as Metabyte’s Re2Flex and Resolution Override technologies will give you
flexibility in your gaming environment even when you are not using eyeSCREAM’s stereoscopic support!
What does eyeSCREAM consist of?
•
Wicked3D eyeSCREAM™ Eyewear
•
Wicked3D eyeSCREAM™ Transmitter
•
Wicked3D eyeSCREAM™ Adapter
•
CR-2032 battery (included with Wicked3D eyeSCREAM™ Eyewear)
•
9 volt power adapter
•
Wicked3D eyeSCREAM™ Installation CD
System Requirements
The following are the minimum system requirements for the use of this System:
•
3D-accelerator card, such as the Wicked3D featuring Voodoo
2
, or other compatible 3Dfx Voodoo
2
– based product.
•
Software that works with the eyeSCREAM Stereoscopic Eyewear System, such as eyeSCREAM™-rated games
(see http://www.wicked3d.com for list of games).
•
Multiscan monitor capable of at least 100Hz vertical refresh frequency
•
Pentium 90 MHz or 100% compatible
•
8MB System Memory
•
Windows 9x
THE eyeSCREAM EYEWEAR
Your eyeSCREAM Eyewear takes advantage of the latest advancements in electronics and optics to provide a lightweight,
high-quality imaging system. The Eyewear contains high quality liquid crystal lenses which, when properly cared for, will
deliver endless hours of viewing.
•
The Eyewear fits most head sizes and can be worn over most prescription eyeglasses.
•
The Eyewear turns on automatically when you place them on your head, and turn off automatically when removed.
•
The Eyewear communicates with the Transmitter via infrared light signals similar to those used by your TV remote
control. In order to work properly, a clean line of sight must be provided continuously between the Eyewear and the
Transmitter.
•
To ensure comfortable viewing for all types of individuals, the lens spacing on the Eyewear can be adjusted. Use the
slides located on the bridge of the Eyewear to set the spacing of the lenses so that the edges do not obstruct your view of
the monitor.
•
The Eyewear is designed so that the temples and small shield attached to the center of the Eyewear are removable.
They can easily be reattached if necessary. Reattach the shield by placing the tab on the top of the shield into the hole
on the bridge of the Eyewear. The "hook" on the shield then easily clicks into place. Note: The "hook" should not be
inserted into the hole on the bridge of the Eyewear.