Customer helpline number: 01604 633607
7
Step-by-Step Installation Instructions for
Sliding Door (217-005)
20.
Insert the screw cap seals onto all exposed screw heads
Fig.16.
21.
Insert blanking plates as required into their corresponding positions
Figs.17 & 18.
(Fixing should be completed using good quality, Wickes clear silicone.
22.
Making sure the room is well ventilated; fi nish off by applying silicone sealant as shown in
Fig.19.
Note: Sealant should not be applied to the inside of the enclosure when fi tted over
tiles (only the outside) – this stops water from becoming trapped and turning stagnant.
Allow 24 hours (under normal conditions) for the silicone to cure before using the shower.
19
18
18
16
17
8892_Step_By_Step_Sliding Door_V3.indd 7
8892_Step_By_Step_Sliding Door_V3.indd 7
1/9/10 17:54:02
1/9/10 17:54:02
