Wickes 223724, Manual

10

The gearbox is lubricated with grease. Refilling is required 

when the hammer efficiency is low. Open the cover using 

the spanner (11) provided and add general purpose lithium 

based grease.

CAUTION: Keep the container of grease away 
from children.

10. LUBRICATION (See Fig. I)

Fig. I

This tool will generate high forces when use. Always hold the tool with both hands and adopt a secure posture.

If the drill bit or chisel becomes jammed in the workpiece, the clutch will activate stopping the tool spindle. This is normal. 

Switch the machine off, loosen and remove the drill bit or chisel from the work piece.

CAUTION:

 Switching the machine on with the drill bit or chisel jammed in the work piece will generate high reaction 

torque and can result in injury.

11. SAFETY CLUTCH PROTECTION 

Before drilling, fit the dust cover (12) over the drill bit.

CAUTION: Always wear eye protection with this 
tool.

9. DUST COVER (See Fig. H)

Fig. H

1. Adjust the hammer and chisel action selector (2) to 

position “ 

 “ .(See Fig. G1)

2. Adjust the hammer and drilling action selector (13) to 

position “ 

 “ .(See Fig. G2)

3. You are now set to chisel without rotation..

NOTE: Press the selector switch lock button before 
adjusting the dial selector everytime.

WARNING: You must make sure that the 
selector switch is positively locked in chisel 

mode position. If not, it could cause a hazard. 

8. CHISEL FUNCTION (See Fig. G1, G2)

Fig. G1

Fig.G2

lock button