Aquatronic 3 ultra
CLEANING THE INLET fILTER
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by an installer or service engineer.
Important:
Before servicing, switch off both
the electricity supply and water supply at the
mains.
The inlet filter is situated at the bottom of the
inlet pipe
(fig.)
.
To gain access to the filter, remove the trimplate
and then unscrew the retaining nut from the
bottom of the inlet pipe.
When cleaning the wire mesh filter, DO NOT
use a sharp object, as it will cause damage. It is
preferable to use an old toothbrush or similar.
)LOWHUDQG
µ2¶ULQJ
,QFRPLQJ
SLSHZRUN
Fig.
INSTRUCTIONS fOR INSTALLERS AND SERVICE ENGINEERS ONLy
Summary of Contents for TRITON Aquatronic 3 ultra
Page 23: ...Aquatronic 3 ultra 21...
