colored black
．
The wire which is colored brown must be connected to the terminal which is marked with the letter ‘L’ or
colored red.
WARNING
：
To reduce the risk of fire or electrical shock, do not use this fan with any sold state speed
control device.
ASSEMBLY
Remove the packaging material from the fan control box.
Remove the screws from the two extremities of the base tube.
Insert the tube into the fan body.
Align the screws hole and tighten the holding screws onto the base.
NOTE
：
When installing the control box, make sure the electrical wires are located on the outside of the
base.
OPERATION
Hanging your fan on the wall.
Plug the power cord int0 230V volt AC wall outlet.
The 3 speeds system is designed to give you maximum flexibility and to meet all your air circulation needs.
LOW or MED speed setting can be used for most of your requirements.
High speed should only be necessary in exceptional circumstances.
Select the desired speed by using the rotary control switch.
Adjust to your desired air stream by tilting the fan assembly to the require position.
CARE AND STORAGE
Turn the control to OFF and unplug the fan before cleaning.
Use only a soft, damp cloth to clean the fan.
Do not place the fan in water and never allow water to drip into the Motor Housing.
Do not use gasoline
，
paint thinner or other chemicals to clean the fan.
To clean the fan blade, remove the front grill and wipe the blade and grills.
Reassemble the fan by snapping the front grill into place.
Store the fan in its original box or cover the fan to protect it from dust.
Store it in a safe, cool, dry place.
DISPOSAL
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources.
