6
7
In
st
an
t e
ar
-ti
p
The ear-set
Make sure that the ear-set is clean and free of earwax
and moisture. If the ear-set tubing becomes plugged, it
must be cleaned. Remove the ear-set from the hearing
aid. Remove the ear-tip from the coupling. Then clean
the tubing with the cleaning thread (no. ). Never use
alcohol or other cleaning solutions to clean the ear-
set.
Holding the hearing aid
securely at the neck as
shown in the diagram, pull
the ear-set off the hearing
aid.
Pull off the ear-tip
The hearing aid
Never clean your hearing aid with
water or cleaning solutions. In-
stead, clean your hearing aid with
the soft cloth (no. ) after use.
The microphone openings
Use the wax removing tool (no.1)
to clean the microphone open-
ings. Pass the wax removing tool
straight through the openings. If
you feel resistance, withdraw the
tool and try again. Use only the
recommended wax removing
tool.
When the hearing aid is not in use, it is a good idea to
leave the battery drawer open, so as to ventilate the
hearing aid and allow it to dry.