Listening programs
Your Bravissimo BV-19 behind-the-ear hearing aid may be
equipped with a number of listening programs optimised
for different listening situations . Your hearing healthcare
professional can help you select the programs that are
of use to you and make them available on the hearing
aid program button . If your needs change over time, the
combination of listening programs can be changed . In
these user’s instructions, the hearing healthcare profes-
sional can list the listening programs that are available in
your hearing aid (see page 25) .
Listening programs:
M: (microphone)
. This is the standard program, which
means it is the listening program for ordinary listening sit-
uations .
T: (telecoil)
. This listening program can only be used
where a loop system or specially adapted telephone is
installed . By selecting this program you can listen to the
sound source and shut out surrounding sounds .
M+T.
This listening program is a combination of the
M
(microphone) and
T
(telecoil) programs . If you activate
“M+T”, you can listen to the source of sound and still hear
the surrounding sounds .
Switching between the
listening programs
You switch between the pro-
grams by using the program
button on the back of the
hearing aid .
To switch between programs
1 and 2, press the button
briefly once (approx . 1 second) . To switch from program
1 to program 3 you also press the button once, but for a
longer time (approx . 3 seconds) .
If your Bravissimo hearing aid is set to program 3 and you
press the program button, the hearing aid will always
switch to program 1 (whether you give it a short or long
press) .
Each time you switch to another program, you will hear
beep-tones . They tell you which program you have cho-
sen; one brief beep-tone for program 1, one brief deeper
beep-tone for program 2 and two brief beeps for program
3 . The number of different beeps depends on how many
programs you – together with your hearing healthcare
professional - have chosen to have in your hearing aid .
