4
Operation
1. Insert the USB cable into the 5V power
supply and the Micro-USB connector
into the socket on the rear side of your
drying station. Illustration 1.
2. Plug the power supply into an AC power
socket. Illustration 1.
3. Open the lid of your Widex DRY-GO UV.
4. Remove the batteries from the hearing
aids. Place the pre-cleaned earmoulds
and hearing aids in the drying station
with the battery drawer open.
Illustration 2.
5. Briefly touch the sensor button and then
close the lid. Illustration 2.
• The drying programme starts, and
will stop automatically after three
hours.
• An LED light indicates that the unit is
on.
• A blinking LED light indicates that
the UV-C light is on for the first
eight minutes of the drying period.
GB
9 514 0251 001 #05.indd 4
27-11-2014 08:42:33