34
35
Hearing aid with a closed ear-tip
2: Continue pulling until the an-
chor is stopped by the grip at
the end.
3: Now guide the pointed end
of the anchor through the lower
hole to form a small loop.
4: When the loop is the correct
size, any excess should be cut
off, leaving only the loop.
The anchor loop has the correct size when it supports
the position of the ear-tip in the ear canal, and the ear-
set sits securely in and on the ear.
5: Take great care to cut off all
the excess so that the end of the
anchor loop is flush with the
small hole and there are no
sharp edges. Use the tip of your
finger to check for sharp edges.
If part of the anchor sticks out
through the hole, creating an uneven surface, this may
cause irritation of your ear.
