OPTIONAL: ATTACHING THE DEVICE TO THE BACK OF
YOUR TV - SEE ILLUSTRATION 8
To attach the device to one of the upper corners of your TV, follow these steps care-
fully:
1. Clean the surface on the back of your TV using the cleaning sachet. Let the surface
dry for a few seconds.
2. Remove the protective foil of the adhesive tape on your mounting bracket.
3. Press the adhesive tape on the mounting bracket on the back of your TV and keep
it pressed for 5 seconds.
4. Pull the cables through the cable holder on your mounting bracket.
5. Slide the device into the mounting bracket and secure the cables with the cable
fastener.
NOTE
Do not attach the device directly to your TV's ventilation system. Where the ventila-
tion system is placed depends of your TV.
NOTE
Don't keep the device in a drawer - this might have a negative impact on wireless data
transmission - see illustration 9.
NOTE
For longer transmission range keep the device in line of sight.
227
