widinovations Confidential
©
19
After the element is in position the electrical connection can now be established using the following
sequence of images as a guide.
ATTENTION!
Danger - electric current
This procedure should only be performed while the machine is unplugged.
Collect the wrench from the accessory box and use it to remove the nuts and washers on both extremities of
On the tip of the heating element,
after that replace the washer and nut ant tighten them well. Place the ceramic protection on the tip and screw it
back on.
Repeat the process on the opposite extremity of the heating element.
Finally, return the side covers to their original position.
