Ku nst sto ffschweißtec hni k
Starting and operating
Chapter 5
02.08.2011
Working Instructions WIDOS 4900 CNC 3.5
Page 23 of 68
5.6. Description of the display
No. Denomination
Function
1
Display
•
shows the required parameters (for welding and
programming)
•
3 values can be displayed simultaneously
2
Operating buttons
•
Setting the pipe data and the project number
•
Setting the machine type
•
Setting the welding parameters
•
Saving and printing the welding data
•
Diagnostics menu
5.7. SD – card and drive
The unit CNC 3.5 has a drive for a SD - card.
The machine stores the welding data in the internal memory as well as on the SD – card if a card
is in the drive.
On a card with 64 MB memory capacity, the welding data of about 32000 weldings can have
place.
•
The SD - card must be formatted by
“FAT 16”
necessarily before usage.
•
Insert the card with its inscription to the top
carefully
and with low force into the reading unit.
•
The card can be read out with a WICON program.
•
The card may not be bent, opened, overheated and become wet!
Please only use SD cards purchased from WIDOS. We will not be liable for any
cards from other manufactures!
2
1
