Ku nst sto ffschweißtec hni k
WIDOS
Einsteinstr. 5
Phone +49 (0) 71 52 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax
+49 (0) 71 52 99 39 - 40
Website: www.widos.de
Email: info@widos.de
02.08.2011
Working Instructions WIDOS 4900 CNC 3.5
Page 46 of 68
8. Transport
The machine can be transported in 3 transport boxes or 1 packing box.
Due to its compact design, the packing box is more suitable for longer transports.
In each box holders are included which are suitable for each single element of the machine in
order to avoid slipping.
•
Put the elements into the box in such a way that they are fitting in the holders.
•
The hydraulic hoses at the basic machine should not be unscrewed (air penetration).
Make sure that they are not being squeezed.
•
The sensors integrated in the machine are sensitive high precision devices which need to be
handled carefully in order to reach a longer life.
•
Do not tilt the machine too much.
•
Protect the machine from heavy chocs.
•
Make sure that the box cover is closed correctly.
•
Never
lift or transport the basic machine at path measuring system!
•
During the construction of the transport box a stress was put on a light-weight-construction.
•
Take much care when using automatic handling and carrying machines.
Transport the planer in the reception box.
If the planer is transported in the basic machine, grease the holders with PTFE-
spray because otherwise damages at the piston and sealings may occur.
