Kunststoffschweißtechnik
Safety
Rules
Chapter 2
14.04.14 Working
Instructions
WIDOS MINIPLAST 2
Page 10 of 42
2.3. Obligations of the worker
All persons who are to work at the machine are obliged before working:
to follow the basic safety and accident protection rules.
to have read and understood the safety chapter and the warnings in this manual and to
confirm by their signature that they have well understood them.
2.4. Measures of organisation
All equipment required for personal safety is to be provided by the owner.
All available safety equipment is to be inspected regularly.
The working instructions have to be permanently kept at the place of use of the machine.
They are to be at the operator‘s disposal at any time and without much effort.
In addition to the manual, the common valid and the local accident protection rules and
regulations for the environmental protection must be available and followed.
Every time the machine changes hands or is being rent to third persons, the working
instructions are to be sent along with and their importance is to be emphasized.
2.5. Instructions for the staff
Only skilled and trained persons are allowed to work at the machine.
It must be clearly defined who is responsible for transport, mounting and dismounting,
starting the operation, setting and tooling, operation, maintenance and inspection, repair
and dismounting.
A person who is being trained may only work at the machine under supervision of an
experienced person.
2.6. Structural modifications on the machine
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer.
Machine parts which are not in a perfect condition are to be replaced immediately.
Only use original
WIDOS
spare and wear parts.
2.7. Cleaning
the
machine
The used materials and tissues are to be handled and disposed of properly, especially:
when cleaning with solvents
when lubricating with oil and grease.