Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
03.03.2009
Working Instructions WIDOS PSM 15 with pneumatic clamping
Page 11 of 33
2.8.3. Danger of crushing near and between the clamping beams
You may jam or crush your fingers.
-
While closing the clamping beams do not reach between beams and sheet.
-
Only activate the pneumatic clamping if no body part or foreign object is within
the clamping area.
-
While closing the tables do not reach between beams and sheet.
2.9. Structural modifications on the machine
•
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In case of disrespect the warranty or liability will expire.
•
Machine parts which are not in a perfect condition are to be immediately replaced.
•
Only use original
WIDOS
spare and wear parts.
•
In case of purchase orders please always indicate the
machine
number
!
2.10. Cleaning the machine
The materials you use for cleaning the machine have to be properly treated and have to be
appropriately disposed, especially:
•
when cleaning with solvents
•
when lubricating with oil and grease.
2.11. Warranty and liability
Our „General Sales and Delivery Conditions“ are principally valid.
They are at the owner's disposal at the latest when signing the contract.
Warranty and liability demands referring to damages of persons or objects are suspended if they
are caused by one or several of the following reasons:
•
not using the machine according to the prescriptions
•
improper transport, building-up, starting and operating the machine and maintenance
•
ignoring the information given in this manual
•
structural changes at the machine without permission
•
unsatisfactory checking of machine parts which are worn out
•
repairs performed in an inexpert way
•
catastrophes by external influence and Acts of God.
