Ku nst sto ffschweißtec hni k
Operating and indicating elements
Chapter 4
03.03.2009
Working Instructions WIDOS PSM 15 with pneumatic clamping
Page 17 of 33
4.4. How to clamp sheets for angle welding
You may weld an angle out of two plastic sheets on the
WIDOS PSM 15
.
The horizontal sheet of 10 up to 20 mm is clamped onto the left side
(chapter: 4.2).
The vertical sheet, from 5 mm thickness, is clamped onto the right side.
First clamp the right beam (without sheet) tightly onto the right attachment.
Put the vertical sheet onto the interior of the right clamping beam onto the ledge and fix sheet
e.g. with screw clamps.
Additionally fix the heating element in height
by a spacer.
The machine disposes of (optional) spacers
for a sheet thickness for the horizontal sheet
of 10 / 15 / 20 mm.
Please always align spacer and sheet
thickness in order that the vertical sheet is
only heated in the welding area.
Remove spacer after heating otherwise you
will not be able to turn the heating element
downwards.
ledge for horizontal sheet
horizontal sheet
vertical sheet
spacer
screw clamp
Put spacer here into the lifted heating
element.
