Ku nst sto ffschweißtec hni k
Description of product
Chapter 1
03.03.2009
Working Instructions WIDOS PSM 15 with pneumatic clamping
Page 7 of 33
1.4. Designation of the product
The product is designated by a type label.
It contains the type of the machine, the serial number and the year of construction.
1.4.1. Technical data
1.4.1.1.
WIDOS PSM 15 general data
Sheet size max. (L x W):
1500 x 20 mm
Welding material:
PP, PE 80, PVDF, PE 100
Fuse protection:
16 A
Line cross-section:
1,5 mm²
Dimensions (W x L x H)
appr. 810 x 2000 x 1150 mm
Weight:
305 kg
Max. pneumatic working
pressure
6 bar
Emissions
By using the stated plastic materials during operation within a
temperature range of up to 260° C, no poisonous vapors are
generated.
Ambient conditions in the
welding area
-
Keep the workshop clean (no dust at the welding spot)
-
Do not weld below 5°C
-
Avoid humidity, if necessary use tent
-
Avoid strong sunlight
- Avoid strong wind
1.4.1.2.
Heating element
Power:
2,5 kW
Current:
10,9 A (± 10 %)
Voltage:
230 V (± 10 %)
Frequency:
50 Hz
Surface:
Anti-stick coated
Included components:
- electronic temperature adjustment
- control lamp (green)
- on / off switch with control lamp (red)
1.4.2. Accessories
The following tool is included in initial delivery.
1 each
Ring / flat spanner SW 13 / 17
Order numbers and individual parts, please see „spare parts lists“, when ordering please indicate serial
no. of the machine!
