All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
37
8.0. Maintenance
8.4. Cleaning
Clean the SNOW MASTER VARIO
regularly. You will prolong the
service life of expensive
components and simultaneously
detect:
•
Loose components
•
Damaged cables or lines
•
Wear and unintended
collision points.
NOTE:
Do not bring plastic and sealing
elements in contact with aggressive
fluids (e.g. carbon tetrachloride,
tri, benzene, caustic
solutions,acids etc.).
Bind drops of oil with a binding
agent and dispose of it according
to the regulations. Eliminate the
cause.
Only use wire brush and caustic
solutions in case of emergency.
Auxiliaries and application
Cleaning with water
•
All dirty parts, but use caution:
⇒
water causes rust.
Cleaning with dry cloth
•
All signs and inscriptions
Cleaning with compressed air
ATTENTION !
Exercise caution when using
compressed air. Put on safety
glasses! Without safety glasses you
risk eye injuries! Furthermore you
blow dirt into the guides and
bearings. For this reason, avoid
this cleaning method.
