All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
35
6.0. Maintenance
6.8. Tire pressure
The tire pressure depends on
the soil conditions.
Paved ways and areas, good
bearing turf or soil
Tire pressure maximum 2,0
bar.
The tire pressure depends on
the soil conditions.
Tire pressure minimum
0,5 – 1,0 bar. Due to the low
tire pressure, the contact
surface of the tire can be
enlarged and lanes can
therefore be reduced or even
avoided.
Notice!
The load capacity is reduced.
Drive slowly and lift somewhat
the blower at obstacles such as
curbstone edges or rootstocks.
Otherwise the tire could be
damaged.
6.9. Angular gear
The grease filling for the
angular gear must be replaced
once a year as described in
Chapter 6.3.
For that purpose remove the
tube flange.
Fill the gearbox housing with
50% low-viscosity grease (Multi
Oils 'Getriebefließfett GPOH-
25' or similar).
When re-assembling, seal the
casing with fluid sealing
paste.
4603.25
