All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
43
8.0. Maintenance
8.5. Cleaning
The main cleaning point is the
air intake grid.
When using compressed air or
high-pressure cleaners, ensure
that no water, dirt or other
foreign bodies can penetrate the
gearbox or bearing.
8.6. Hydraulics system
CAUTION :
High-pressure fluids leaking
under high pressure can
penetrate the skin, causing
serious injury.
Check hydraulic lines at
regular intervals for
damage and aging and
replace if necessary.
Therefore, before
separating the lines,
depressurize the system.
Before again building up
pressure in the system,
make sure that all
connections are properly
sealed.
Hydraulic oil emerging
under pressure from a
small aperture is barely
visible; therefore use a
piece of cardboard when
looking for leaks.
Protect hands and body.
If any fluid penetrates
the skin, it must be
cleaned immediately by a
doctor who is familiar
with this type of injury;
otherwise, serious
infections could result.
Doctors who are
unfamiliar with this type
of injury should obtain
relevant information from
a competent medical
source.
