Terra Clean 100
8 Before initial operation
34
239 99 01
–
003
10 | 2020
8.2.
Settings on the machine
8.2.1
Setting the working height
The machine has an adjustable central working height.
➢
Drive the tractor and attachment device onto the
artificial turf area.
Depending on the condition of the ground or the compression of
the granulate, you may need to set the correct working position
tooth-by-tooth.
INFO!
➢
Check the setting after a few metres.
➢
Adjusting by one tooth results in a height
difference of 5 mm.
➢
Raise the adjusting lever (
1
) tot he „0“ position (
2
).
The minus values on the scale are required for worn strip
brushes.
When set to 20 with a new strip brush, the clearance (
Y
) from
the lower edge of the strip brush to the firm ground is approx. 20
mm.
