All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
30
6.0. Before Using
6. 3. Mounting the tines
NOTE
When mounting the tines:
1.
Lift the TERRA SPIKE
with tractor hydraulics.
2.
Lower front roller to
bottom position.
3.
Lower the TERRA SPIKE on
front roller.
4.
Shift the tine holder you
are working with upwards
(by pressing an upper
tine holder).
5.
Plastic plugs are inserted
into the cylindrical holders
for protection. These
components prevent the
supports that are not
installed from blockage.
6.
To mount the tools, remove
the plastic plugs.
7.
Lubricate the tine holder
in the receiving area.
8.
In installation position
the pointed end of the
tine (A) must be backwards
(viewed in driving
direction).
NOTE:
The working depth is changed
due to wear of the tines.
Therefore it is necessary to
readjust the working depth:
1.
after each tine
replacement,
2.
after long working periods
with the same adjustment.
870.27
