Safety instructions
Wieland Electric GmbH | BA000870 | 06/2020 (Rev. A)
6
SAFETY INSTRUCTIONS
This chapter is for your safety and the safety of equipment operators. Please read this chapter care-
fully before working with the
wienet SDS
.
General safety instructions:
•
Personnel installing, programming, operating or maintaining the
wienet SDS
must have read and
understood this manual.
•
The personnel must be thoroughly familiar with all warnings, instructions and requirements con-
tained in this manual.
•
The applicable local safety, protection and installation requirements must be observed.
•
The user is solely responsible for selecting the correct product and the technical design in accord-
ance with appropriate local regulations.
•
Damaged products must neither be installed nor put into operation.
•
The unit must not be opened.
•
Do not insert any objects into the unit!
•
Keep the unit away from fire and water!
Risk of severe injuries caused by electric shocks due to lightning.
Never install or work with electricity or cabling during periods of lightning activity.
Risk of fire and burns due to hazardous gases and hot surface.
•
Never connect or disconnect power when hazardous gases are present.
•
Do not touch or work on the device when its surface is hot. Disconnect the power and allow unit to
cool for 5 minutes before touching
.
Risk of injury and/or product damage due to unauthorized modifications of the product.
•
Unauthorized modifications or utilization of accessories that have not been approved may result
in damage to the router and in a breach of applicable regulations.
•
Unauthorized modifications or utilization of accessories that have not been approved may result
in the termination of the validity of the guarantee.
•
Use only the original accessories.
Risk of product damage due to extreme ambient conditions.
Do not expose the router to extreme ambient conditions. Protect the router against dust, moisture
and high temperature.
It is recommended that you make a copy or backup of all major settings stored in the device
memory.
Any other application or change to the device – even during assembly and installation – will result in
the invalidity of any warranty claims against Wieland Electric GmbH.
W A RNI NG
W A RNI NG
W A RNI NG
A TTENTI ON
A TTENTI ON
NOTI C E
