About this manual
Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A)
5
1
ABOUT THIS MANUAL
Please read this chapter carefully before using the user manual or the products.
1.1
Scope of application
This manual is valid for the following product family: Distribution box -
gesis®
CPO.
1.2
Function of this document
This manual supports you in the project planning electrical systems and the assembly, installation,
commissioning, maintenance and disposal of the distribution boxes. You will find notes on how the
devices can be implemented.
This document contains the information required for the intended use of the device as well as tech-
nical data. It describes the technical characteristics and how to use the system components.
Hand over the documentation to the owner after successful installation and/or initial commission-
ing.
1.3
Target group
The assembly and commissioning of the components is the exclusive responsibility of qualified elec-
tricians. The legally binding and valid regulations for electrical installations must be observed.
This manual is intended for:
•
Those who can prove that they have the corresponding training and already have correspond-
ing basic knowledge of project planning and commissioning electrical installations.
•
System integrators
•
Electricians
•
Operator of the electrical system
1.4
Function and structure of this manual
This user manual provides technical staff with information about the configuration, operation and
functionality of the
gesis®
CPO distribution box.
You can find further information on our website
or via the QR code.
NOTE
