General product information
Wieland Electric GmbH | BA001287 | 06/2022 (Rev. A)
8
3
GENERAL PRODUCT INFORMATION
3.1
Product description
The product is a pre-wired distribution box for pluggable electrical installation. The distributors are
manufactured according to IEC 61439. The Wieland
gesis®
CPO distribution box is a simple solution
for addressing the needs of a flexible, decentralized installation, such as a flexible office. A range of
suitable distribution boxes are available for the decentralized distribution of power, signals or data.
Thanks to the
gesis®
and
RST®
Plug&Play installation connector systems approved in accordance
with IEC 61535,
gesis®
CPO distributors can be plugged in directly on the construction site after as-
sembly.
Figure 1: Decentralized data and power distribution with consolidation point (sample view)
3.2
Symbols on the product
The following symbols can be found on the product.
Conductor identification yellow/green conductor earth
CE marking
For disposal, this product should be treated as electrical and electronic equip-
ment waste and should not be disposed of as household waste.
EAK: 16 02 16
