gesis LON R: System Overview
12
Wieland Electric | BA000580 | 6/2009 (Rev. A)
3
gesis LON R: System Overview
3.1
Selection of an Application Program
This manual refers to the application program with the file name WiRcGate1x.
3.2
Modules With No Mounting Feet
In order to achieve a minimum installation height of approximately 55 mm when installing
modules in the gesis RAN pluggable distribution box, they are also manufactured without
feet. These modules are installed in the gesis RAN in the factory using special equipment.
3.3
Place of Installation
The modules must be installed in a gesis RAN or similar housing. If a gesis RAN distribu-
tion box is used, the modules are installed by Wieland and wired to gesis CON series con-
nectors. The distribution box is designed and manufactured in accordance with customer
requirements, meaning it can be adapted to almost any conditions. The system/customer-
specific planning and design of the distribution box also extends to labelling of the inputs
and outputs. External connections are established using the gesis CON connector system.
As terminal blocks, transformers and other similar devices can also be installed in these
distribution boxes, this allows complete room functions to be created and efficiently inte-
grated into the pluggable electrical installation.